RXP-X Bilge Pump Install Attwood Thru-Hull
|
|
Rule Submersible Bilge Pump, 500 GPH $17.80 Rule 500 GPH Bilge Pump. Automatic and non-automatic models! A powerful Pump for smaller boats! 3/4″ discharge unit. 12V. Non-Automatic 12V: Amp draw: 1.9 amp; Fuse size: 2.5 amp; 3 1/2 x 2 3/8″; Order Now! AVAILABLE SEPARATELY: Rule Bilge Pump 500 GPH 12V Auto – word search in our Store for ‘Rule’. Rule Bilge Pump 500 GPH 12V Non-Auto… |
|
|
Attwood Sahara Automatic Pump Attwood Sahara Automatic Pump… |
|
|
Rule 24 Marine Rule 360 Marine Bilge Pump (360-GPH, 12-Volt) $12.67 Rule Submersible Bilge Pumps give you BIG value for your dollar! Rule submersible bilge pumps have set the standard for the industry for many years. They are the first choice of yachtsmen and commercial fishermen throughout the world. More innovations in bilge pump design have come from Rule Industries than any other manufacturer. Totally submersible; Compact, efficient, maintenance-free; Silent r… |
|
|
Attwood Automatic Float Switch w/Cover – 12V & 24V $20.11 Float Switch w/CoverPart #: 4201-7Converts bilge pumps to fully automatic operation. Maximum amp draw is 12 amps (at 12-volt D.C.) or 6-amps (at 24-Volts D.C.). Features a compact, low profile design that mounts on any surface from a horizontal up to a 24 angle. Incorporates a reliable and affordable mechanical switch that actuates pump motor at 2 water level. Wire leads do not flex or hinge with the float as on some competitive models. Integral cover dampens bilge sloshing to reduce pump cycling, and prevents debris interference. Sealed switch mechanism resists moisture, fume-ignition, and electrical shock. Contains no mercury, which is listed as a health hazard and Persistent Toxic Substance in over 26 states.Float switch installs independently or directly onto the rear slots of the V-Series pump bracket. Features a convenient test knob to test pump operation.Features:36 Wire12V and 24VCE RatedIncludes CoverSpecifications:Volts: 12V & 24V |
|
|
Attwood Bilge Pump Installation Kit w/Switch, 3/4 Hose Clamps & 20′ Wire Fuse Holder $29.11 Bilge Pump Installation KitPart #: 4116-5Complete kit to install manual bilge pump with 3/4 or 1-1/8 I.D. hose outlet.Features:(1) 2-way on/off switch with bezel plate(1) 3/4 I.D. x 5′ corrugated hose(1) Thru-hull fitting for 3/4 I.D. hose(2) Snap-It hose clamps(2) 2-conductor 16-gauge wire, 20′ long(1) In-line fuse holder with two-amp fuseCaution: Bilge pump switches are not external-ignition protected.Specifications:Operation: Non-Automatic |
|
|
Attwood Bilge Switch S3 Series – 12V $26.1 Automatic Bilge Switch S3 SeriesPart #: 4801-7Incorporates a proprietary Electronic Sensing technology to detect bilge water levels and trigger pump activation and has been engineered to operate in any bilge water mixture consistently without failure. Your pump won’t be exposed to continuous cycling as the S3 switch can easily distinguish splashing bilge water, chemicals, sludge build up or foam and comes equipped with fully sealed electronics that are completely protected from water or chemical damage. For added convenience, the bilge switch can be mounted on the floor of the bilge directly to a stringer wall or alongside the basket of the pump without added components or brackets. The S3 Series switch is also directly compatible with all competitive products and free of moving parts that can jam up, break or wear out over time.Features:12V15 Amp36 Wire5-Year WarrantySpecifications:Volts: 12V |
|
|
Attwood Sahara Automatic Bilge Pump S1100 Series – 12V – 1100 GPH $79 Sahara Automatic Bilge Pump S1100 SeriesPart #: 4511-7An automatic-switch bilge pump is a requirement for any vessels 20′ and over with sleeping accommodations, but is a great convenience for any size boat. The Sahara has everything contained in one compact yet durable package – pump, wire seals, strainer, and mercury-free switch – and installs quickly and easily in tight spaces. Pumps include 36 lengths of 16-gauge caulked and tinned copper wire.S1100 is Attwood’s most powerful and efficient automatic pump. High capacity for larger boats and yachts. 1100 GPH at open flow, 973 GPH* at 3.3′ head. 1-1/8 hose outlet.Features:12VHose Size – 1-1/8 I.D.36 Wire3-Year WarrantySpecifications:Gallons Per Hour: 1100 GPHVolts: 12V |
|
|
Attwood Sahara Automatic Bilge Pump S750 Series – 12V – 750 GPH $67.47 Sahara Automatic Bilge Pump S750 SeriesPart #: 4507-7An automatic-switch bilge pump is a requirement for any vessels 20′ and over with sleeping accommodations, but is a great convenience for any size boat. The Sahara has everything contained in one compact yet durable package – pump, wire seals, strainer, and mercury-free switch – and installs quickly and easily in tight spaces. Pumps include 36 lengths of 16-gauge caulked and tinned copper wire.S750 is sized for larger recreational boats. Our most powerful 3/4 -outlet automatic pump. 750 GPH* at open flow, 625 GPH* at 3.3′ head. 3/4 hose outlet.Features:12V3/4 I.D.36 Wire3-Year WarrantySpecifications:Gallons Per Hour: 750 GPHVolts: 12V |
