Rain Power and Solar Power are the Green Option
Constantly, the rainwater harvesting industry is searching for different ways to make rainwater harvesting more economical and practical. By using rainwater harvesting you can reduce your mains water consumption by between 30% and 50%, and we are all now are under strong government pressure to achieve this. The Code for Sustainable Homes recommends rainwater harvesting for its higher target levels (maximum of 80 litres per day per person) and new Building Reg Part G 17K coming in April 2010 will mean that, for the first time, water consumption limits will be a legal requirement in new buildings.
Rainwater harvesting does, however, in most circumstances use an electric pump to take the stored rainwater to where it is needed, and this pump needs power. Steps have already been taken to reduce this pump energy use. There are now specially-designed gravity feed systems whereby a rainwater header tank is only refilled when empty rather than every time water is drawn. This stops the pump hunting, considerably reduces pump activity and, consequently, reduces energy use. To use solar energy to power the pump is the next logical step.
A solar panel the size of a small car windscreen can power a gravity-feed rainwater management system. The solar panel, in combination with a submersible 12 volt pump in the main storage tank and a battery ensure rainwater can be pumped to the rainwater header tank without any use of mains electricity. Both the control mechanism of the system and the pump are powered by the battery which is kept topped up in daytime by solar power. Even on a cloudy day, tests show that the most up-to-date solar panels can give six times the charge necessary to run a rainwater harvesting system in a typical family home. Mains electricity is used as a back up should the panel not provide enough charge to the battery. Furthermore, unlike normal chargers, the standby mode of the mains charger takes no current at all, not even a trickle.
So in such a system, the powerful mains-electric pump is replaced by a small 12 volt pump which pumps to 8-10 metres high, enough to feed a header tank on a two story house. One or more relay pumps, with supplemental solar panels, can be added for taller buildings. You should be aware that this system will only give enough pressure for gravity fed irrigation, not garden sprinkling.
Solar pump kits have been on the market for sometime which allow rainwater to be moved without using mains electricity and without having to turn on and off by hand. Water can be moved, for instance, from a low level garden collecting tank, or even at the end of a polytunnel or greenhouse, to a higher level storage tank. The applications are numerous in allotments, equestrian properties, market gardens and for water features. These kits can supply a drip feed watering system through a header tank (so that water is available for gravity feed at any time, even through a time switch). In some kits, the pump starts when the float switch detects water and turns off when the header tank is full.
Using solar energy to power the pump is a big step forward in making rainwater harvesting an attractive sustainable proposition by saving water while not using extra power to do so.
About the Author
Rainwater Harvesting Limited supplies
rain water harvesting
storage tanks, pumps, filters and management systems to households and commercial businesses. RainWaterHarvesting.co.uk is a large information resource offering valuable technical information and advice in addition to 1000s of product specifications. Download the invaluable
rainwater harvesting tank size calculator
Whale 12 Volt In Line Pumps
|
|
Wayne Water Systems VIP50 1/2 HP 2,500 GPH Submersible Utility Water Pump $78.28 This unique Wayne utility pump passes 1/2in. solids such as leaves, pebbles, and other debris without clogging. 1 1/4in. discharge is adaptable to garden hose thread with rotating adapter (included). HP: 1/2, Flow (GPH): 2,500, Volts: 115, Max. Total Head (ft.): 15, Suction Type: Bottom, Discharge Port (in.): 1 1/4, Pump Housing: Glass reinforced thermoplastic, Volute: Glass reinforced thermoplast… |
|
|
Wayne RUP160 1/6-Horsepower 3,000 GPH Oilless Submersible Utility Water Pump $49.99 This Wayne Thermoplastic Submersible Utility Pump drains flooded basements, empties water-filled boats and removes water from stock tanks and flat roofs with its 1/6 HP motor. Features thermal-overload protection to prevent burn out. Oil-less motor design for environmentally safe operation. HP: 1/6, Flow (GPH): 3,000, Volts: 120, Max. Total Head (ft.): 20, Discharge Port (in.): 1 1/4, Volute: Imp… |
|
|
Zoeller 98-0001 115-Volt 1/2 Horse Power Model M98 Flow-Mate Automatic Cast Iron Single Phase Submersible Sump/Effluent Pump $189.99 FLOW-MATE” SUBMERSIBLE PUMP 1/2 HP For sump/dewatering septic tank effluent Thermal overload protected Cast iron Stainless steel screws 2-pole float operated mechanical switch 1-1/2″ NPT discharge Passes 1/2″ solids 115 volt 3420 GPH at 5, 3060 GPH at 10, 2580 GPH at 15 head One year limited warranty Display carton… |
|
|
Tripp Lite APS2012 2000W 12V DC to AC Inverter with Automatic Line-to-Battery 100/25-Amp Charger $1,089.00 Tripp Lite APS2012 PWRINV APS 2012 2000W 12VDC HWIRE… |
|
|
Mr. Gasket 12S Micro Electric Fuel Pump $35.99 Electric Fuel Pump Carburetor Domestic 4-7 PSI 35 GPH… |
|
|
3.8L 12V Mini DC submersible Water Oil Pump for CPU Cooling Small Pond or HHO System $14.95 This is a high quality made, mini submersiblewater pump. It’s built by a brushless motor providing smooth and quiet operation than a non-brushless water pump. Plus,it will not generate ‘electric spark’ like what a brush type does so it’s more safe. It can be used to pump oil as well (no gasoline*) Specification Input: 9V-12VOutput: 3.8L/m Range: 2.5M (8ft horizon) @12V Current: 500mA@12V Intake: … |
|
|
DC 12V 6.5L (100GPH) CPU Cooling HHO submersible Water/oil Pump $22.50 This is a high quality made, mini submersiblewater pump. It’s built by a brushless motor providing smooth and quiet operation than a brushl type motor. Plus,it will not generate ‘electric spark’ liket a brush type does so it’s more safe. It can be applied to so many area like a HHO system, CPU cooling, solar system, fish tank. It can be used to pump oil as well Specification Input: 9V-12VOutput: … |
|
|
Rule Submersible Bilge Pump, 500 GPH $17.80 Rule 500 GPH Bilge Pump. Automatic and non-automatic models! A powerful Pump for smaller boats! 3/4″ discharge unit. 12V. Non-Automatic 12V: Amp draw: 1.9 amp; Fuse size: 2.5 amp; 3 1/2 x 2 3/8″; Order Now! AVAILABLE SEPARATELY: Rule Bilge Pump 500 GPH 12V Auto – word search in our Store for ‘Rule’. Rule Bilge Pump 500 GPH 12V Non-Auto… |
|
|
Rule 24 Marine Rule 360 Marine Bilge Pump (360-GPH, 12-Volt) $12.67 Rule Submersible Bilge Pumps give you BIG value for your dollar! Rule submersible bilge pumps have set the standard for the industry for many years. They are the first choice of yachtsmen and commercial fishermen throughout the world. More innovations in bilge pump design have come from Rule Industries than any other manufacturer. Totally submersible; Compact, efficient, maintenance-free; Silent r… |
|
|
Attwood WaterBuster Portable Pump $32.70 The handy Water-Buster Portable Pump gives you compact and cordless pumping flexibility at up to 200 gallons per hour. Great for pumping out bilges, water tanks, skiffs, and runabouts. Runs for up to 5 hours on 3 D sized alkaline batteries. The completely submersible pump is ready for any situation. Comes complete with 42” hose which wraps around the pump housing for convenient storage. Incl… |
